The BM-6 instrument is intended to measure the filtration (fluid loss) index of drill muds used in the
process of oil & gas well drilling. On completion of the drill mud filtration index measurement, to the thickness and the anti-friction properties of the clay cake formed on the filter are measured by the KTK-2 “Rubin” instrument.
Specific features of the BM-6 instrument, version 2012, from “Rubin” R&D Co.: tested on the UPG-2 test
unit (consequently, no leakage on the ram) and certification in conformity with RD 018- 84448846-2010. No hard efforts are required to close the valve and the tray.
TECHNICAL CHARACTERISTICS
The instrument meets the requirements of RD 39-00147001-773-2004 “Drill mud control methods” and
the well construction regulatory documents STO Gazprom 7.3-002-2010.
Operating conditions:
|
Ambient air temperature from +10 to +35°C and |
|
| Filter volume measurement range, cm3 | 0 – 40 |
| Scale graduation value, cm3 | 1 |
| Absolute limit of error, cm3 | ± 1.0 |
| Filtration pressure, MPa | 0.098±0.01 |
| Overall dimensions, mm | 120x285 |
|
Nominal volume of the tested drill mud sample, cm3 |
± 1.0 |
| Use oil – I30A, GOST 20799 | |
| Instrument weight, kg | 5 |
SCOPE OF SUPPLY:
- BM-6 instrument in assembly,
- Set of spare gadgets,
- Filtering paper “blue tape” with medium filtration rate, a package of 100 sheets.
- The PTR-1 verification device and verification methods are delivered at the Customer's request.
Megagroup.ru